Multi Channel Graphic Recorder Using Touch Panel

Model Number

GR100

<Features>

- Support large capacity of S.D card
- Various types of displaying screen
- Alarm setup within each channel, support 4 contacts
- Multi inputs (thermo couple, RTD, and etc <17 kinds>)
- Communication: ETHERNET, USB, RS232, and RS485/422

Normal Specification

●	Power supply:100 - 240 V a.c 50/60 Hz
●	Voltage variable rate:+/- 10% of rated power supply
●	Power consumption:Max. 24 VA
●	Ambient temperature:0 ~ 50 °C
●	Ambient humidity:20 ~ 90 % RH(No condensation)
●	Vibration:Vibration width 1.2 mm Max(5 - 14 Hz)
●	Shock:None
●	Insulation resistance:Min 20 MΩ (500 V d.c between terminal and ground)
●	Dielectric strength:2500 V a.c 50/60 Hz for 1 minute
	(Between 1st terminal and 2nd terminal, between 1st terminal and ground)
●	Thickness of panel:2 ~ 10 mm
●	Material:Case → SPC, Front case(Bezel) → ABS
●	External terminal:Bayonet mount type(available to separate when wiring)
●	Memory backup:Internal memory - Parameters are saved
		Outer memory - Measuring value(SD card: 1GB, Approx.
		1 year data can be saved when the record cycle is 2 seconds)
●	Weight:Approx 2.5 kg including packing box

Input

●	Number of channel:6 channels or 12 channels
●	Input:Universal inputs(T/C 12 kinds, R.T.D 2 kinds, DC voltage 3 kinds)
●	Range setting:Set input type and range by front touch menu
●	Scale setting:Set Min. value, Max. value and unit by front touch menu
●	Accuracy:0.1% of maximum range
●	Measuring cycle:1 second
●	Accuracy of standard contact correction:Max. +/- 1.3 °C for T/C
●	Burn-out function:Detect disconnection of input signal for T/C and R.T.D
●	Input correction:Zero / Span or offset correction per channel
●	Allowable input signal resistance:T/C → Max. 250 Ω
		d.c voltage → Max. 2 kΩ
		R.T.D → Max. 10 Ω per wire
		Note:resistance value of 3 wires should be equal)
●	Input impedance:T/C, R.T.D, DC input(mV) → Min. 10 MΩ. DC input(V d.c) → Min. 1 MΩ
●	Terminal:Bayonet mount type(available to separate when wiring)

Recording function

●	Internal memory:Flash(Non-volatiles)-Setting parameter
●	External memory:SD-Card 1GB, Approx. 1 year data can be saved whe the record cycle is 2 seconds
●	File system:FAT 16/32
●	Data save cycle:1 ~ 900 sec.(Max. 15 min.)
●	Save information:Measuring data, Message, Setting parameter, Alarm and cancellation
●	Save method:According to the indication screen's touch menu selection, content is saved from the internal
		memory to the SD-CARD

Alarm function

●	Alarm setting:4 alarms per channel
●	Type of alarm:15 types
●	Alarm save selection:Start, stop or pass a data save function of recorder by alarm operation.
●	Contact output:6 points or 12 points, Alarm, Burn-out, External contact input(D/I)

Indication part

●	Indicator:TFT color LCD(113.28 mm x 84.71 mm), 320 x 234 Dots(18 bit color)
●	Type of color:Color of channel → 12 kinds
		Color of background → Black or white selectable
●	Applicable language:English
●	Operating screen:Horizontal trend, vertical trend, text, bar graph
●	History screen:Display a past data in Horizontal / Vertical trend and text screen
●	Status-view display:Display alarm, digital input(D/I), relay operation, event-log and memory status.
●	Time axis setting:1 ~ 120 min.(Moving time between scale. m/div)
●	Display cycle:According to time axis setting(Min. time 1 sec.)
●	Screen-protection function:When no regulated time exists for screen manipulation, the backlight turns off
			and goes into screen-protection mode. The screen is restored when touched.